Sachtler System FSB 14 Mk II Touch & Go Fluid Head & ENG Carbon Fiber Tripod with Bag

Sachtler FSB 14 Mark II Fluid Head with Touch & Go Plate (100mm)
Create fluid and smooth pans and tilts while supporting a wide range of camera heights with the precision-made Sachtler FSB 14 Mark II Fluid Head with Touch & Go Plate, which supports payloads up to 35.3 lb. Designed to accommodate digital cinema-style cameras, the head offers Sachtler's Touch & Go QR plate that pops in and out of the fluid head's camera platform. The platform features a 4.7" back and forth adjustment for balance. It also features a 15-step counterbalance along with horizontal and vertical 7-step drag controls. In addition, a zero setting on the pan and tilt drag controls allows free movement of the head, useful for whip pans and tilts.

Suitable for interior and exterior work, the head offers consistent and reliable operation from -40 to 140°F, and it features a 100mm bowl with an integrated flat base, allowing you to mount the head on legs and supports with either a 100mm bowl or a flat base fitting. The head features a bubble level with a prism system, so you can set your head to level while seeing the bubble level from above or to the side. The bubble level is illuminated for easy leveling in poor light conditions. A pan handle that can be mounted on either side of the head is also included.

Leveling Ball with Flat Base
The fluid head features a 100mm ball for quick leveling on your tripod legs. The ball features a flat base, so you can also mount it on a flat surface.

Frictionless Leakproof Fluid Damping
Frictionless leakproof fluid damping with five levels of drag enables precision adjustment to match the needs of your shot. A zero setting allows complete disengagement of drag for fast panning.

Camera Mounting and Balancing
Featuring a Touch & Go QR plate, the top of the head features a sliding range of 4.7" for balancing your camera rig on the tripod head.

Sachtler CF-100ENG 2CF Carbon Fiber 2-Stage Tripod Legs (100mm Bowl) - Supports 88 lbs
The CF 100 ENG 2CF two stage tripod, provides maximum stability and carrying capacity. Constructed and drawn out of one-piece carbon fiber material, it is twist resistant and lighter than dural aluminum. It features a 100mm / 4" bowl, tube diameter of 22mm (0.87") and is fitted with the Sachtler quick clamping system, so you can securely - and visibly - lock the tripod.

The CF 100 ENG 2CF's double extension provides greater stability, allowing an extended height range with a payload of 88 lb., and with a weight of only 5.3-lb it's extremely lightweight, solid and stable.

• Carbon fiber construction with 22mm (0.87") tube diameter
• 100mm / 4" bowl base
• Double extension design
• Maximum height of 59.0-inch
• Quick clamping system, locks tripod legs in seconds
• Supports up to 88 lb.
• Built-in transport safety cord, preventing the legs from opening while in transport
• Folding tripod handle, for comfortable carrying of tripod in horizontal position
for extra stability the CF-100 ENG HD 2CF is also available for a load capacity of 210 lb at a height of 61.8-inch

Sachtler Rubber Feet (Set of 3)
Set of three Sachtler Rubber Feet. Snap these feet onto your tripod when it's not possible to use the dual spiked feet, ideal on slippery and glossy floors. For all Tripods with Off-Ground Spreaders (Except OB-2000/M and Cine 2000/M tripods).

Sachtler Mid-Level Spreader for Select 100/150mm Tripod Legs
This Mid-Level Spreader for Select 100/150mm Tripod Legs from Sachtler fits all 100 and 150mm bowls except for flowtech, DA 100 K, DA 150 K, and Cine tripods. It is used when shooting on uneven surfaces such as steps, rocky ground, or slopes. It allows for rapid setup and pulldown by keeping tripod legs at an equal or preset distance relative to each other. It attaches to the center bracket of a tripod and its arms are telescopic to allow for the extension of a tripod leg without detaching the spreader.